Set Up Timer; Usb Media Player Settings; Function Button Settings - Panasonic TH-49AF1U Operating Instructions Manual

Set up timer

Sets the program to turn the power on at the specified
time or with the specified video input, or turn the power
off or restart at the specified time. Up to 20 programmes
can be set.
Note
● Set [Date & time] in OpenPort PLATFORM before
setting [Set up timer]. (see page 59)
● This can be set only when the date is 2016/01/01 and
after.
● When multiple programs are set at the same time,
the program with the smallest program number is
enabled.
●
To set programme to turn the power on/off, set
[OpenPort PLATFORM standby] to [On]. (see page
84)
●
The restart function is supported by the Main version
software (Ver. 2.00 or later).
●
The timer function may not operate depending on
the status, such as when the OpenPort PLATFORM
system is restarting.
[Set up timer] - submenu screen
Setting Example
Program 1, Every Monday, 12:00,
Power On, Input: HDMI1
Set up timer
2016/01/01
Program
Timer function
Day
Power mode
Time
Input
1 Set the program number.
2 To execute the program, set to [On].
The program is disabled when [Off] is set.
3 Set the day.
The program is executed every day when
[Everyday] is set.
4 Set the power On/Off or restart.
[Power on], [Power off], [Reboot]
5 Set the time.
Pressing
Pressing continuously changes time by 15
minutes.
6 Set the input.
86
English
FRIDAY 10:00
1
1
2
On
3
MONDAY
4
Power on
5
12:00
6
HDMI1
once changes time 1 minute.

USB media player settings

Set for USB media player function.
[USB media player settings] - submenu screen
USB media player settings
USB media player
Resume play
Scenario file check
No scenario file
Slide show duration
■
[USB media player]
Set to enable or disable the USB media player
function.
■
[Resume play]
Set resume play off/on.
■
[Scenario file check]
Execute the contents check of the USB memory
which is connected to the USB terminal. If any error
is detected, the error code and file name will be
displayed.
For details of the error codes, refer to "USB memory
contents check". (see page 107)
Select [Scenario file check] with
<ENTER>.
Scenario file check
Available
■
[Slide show duration]
Select the displaying duration for still images.
[10 sec] to [600 sec]

Function button settings

Assigns specific functions to the numeric buttons (<1>
to <6>). The buttons can be used as shortcut keys by
assigning frequently used operations.
1
Switch [Function group] with
[Function button settings] - submenu screen
Function button settings
Function group
Function button 1
Function button 2
Function button 3
Function button 4
Function button 5
Function button 6
OpenPort PLATFORM / KEYBOARD
Function button guide
Enable
On
10 sec
and press
Input
Input
HDMI1 ↓
HDMI2
Memory load
DVI-D
↓
PC
COMPONENT
Shortcut
On
.