Loosen and remove the two screws (5).
Remove electric motor (6).
Check the condition of the O-rings (7) fitted to studs
(8) and if necessary replace them.
Disconnect electric motor (6) from the drive unit.
Remove drive gear (9).
Check the condition of gasket (10) and if necessary
replace it.
Rotate crown (11) so that the holes in it are aligned
with drive unit cover fixing screws (12).
Loosen and remove screws (12).
32
Release 00
2000-11
6
8
11
12
Enjoy
5
7
9
10