Character Entry; Keys Used For Entering Characters - Olivetti d-Copia 18MF Operation Manual

Preparations

Character Entry

3-8
To enter an e-mail address, etc., the characters are entered using the Numeric Keys.
To move the cursor, use the

Keys Used for Entering Characters

1
Address Entry:
h_pttr@
Cancel
5
1
Cursor — Characters are entered by the cursor. To delete a character, move
the cursor to the corresponding character and then press Stop/Clear.
2
Character Limit Icon — Indicates when the maximum number of characters
allowable has been entered.
3
Numeric Keys — Use these to enter characters. Refer to Available
Characters on page 3-9 for a list of the characters that can be entered using
each key.
4
Reset/Power Key — Press this to cancel the character entry procedure.
5
Left Select key — Press this to select the left item when selectable items are
displayed on the bottom line of the message display.
6
Right Select key — Press this to switch between character entry modes.
7
Key - Press this to move the cursor in the message display to the left.
8
Back Key — Press this to go up one level on the current menu.
9
Key — Press this to move the display cursor up.
10
Key — Press this to move the cursor down.
11
Enter Key — Press this to register the currently entered characters.
12
Key — Press this to move the cursor in the message display to the right.
13
Stop/Clear Key — Press this to delete the character at the cursor. If the cursor
is not on a character, the character to the left of the cursor will be deleted.
, , , and
2
ABC
Text
7 9
6
10
8
keys.
3
13
12
11
OPERATION GUIDE
4