Entering Characters - Olivetti d-Copia 18MF Operation Manual

Preparations
1
2
3
4
5
6
7
8
9
3-10
Key Entry mode
Alphabetic/Symbol
Numeric
Alphabetic/Symbol
Numeric
Alphabetic/Symbol
Numeric
Alphabetic/Symbol/
Numeric

Entering Characters

This section explains the procedure to enter characters using the key pad. This is
necessary for entering details such as an e-mail address and host name.
Each character is entered by pressing the associated key on the numeric keys as
many times as necessary in order to display the required character - refer to List of
Character Assignments on page 3-9. You can change between character types by
pressing right Select - refer to Available Characters on page 3-9.
Once the required character is displayed, press a different key or press
the next character. To repeatedly enter the same character, press
cursor and then enter that character again.
Example
To enter h_pttr@owlnet.net:
With the Address Entry screen displayed - refer to Basic Scanning Procedure on
page 4-9. Press
Press 4 times. _ is displayed.
Press . p is displayed.
Press . t is displayed.
Press . The cursor will move one space to the right.
Press . t is displayed.
Press 3 times. r is displayed.
Press 2 times. @ is displayed.
Enter the rest of the characters in the same way, and press Enter.
Completed will appear and the message display returns to the basic screen.
Available characters
w x y z W X Y Z 9
9
. , - _ ' ! ? (space) 0
0
Switch between upper-/lowercase
* or . (decimal point)
#
2 times. h is displayed.
to enter
to move the
OPERATION GUIDE