Default Operation Mode - Olivetti d-Copia 18MF Operation Manual

Default Operation Mode

System Menu/
Counter
or
Common Setting
Enter
or
Default Operat
Enter
OPERATION GUIDE
Use the following procedure to set the operation mode selected when the machine
is powered on. Modes available are Copy Operation, Send Operation or Status
Operation. It is recommended you select the most commonly used mode as the
default.
1
From System Menu/Counter press
press Enter.
If you are unsure how to use this route map refer to Accessing Menu Items on
page 3-3.
2
Press or to select Default Operat and press Enter.
3
Press or to select the default operation mode from among Status, Copy
or Send.
4
Press Enter. The message display shows Completed and returns to Common
Setting.
5
Press right Select. The message display returns to the basic screen.
or to select Common Setting and
Preparations
3-7