Table of Contents
Advertisement
3
3.4
Configuring Enlarge Display operations
Changing the default in the Enlarge Display mode
Change the setting on the screen that is displayed when Enlarge Display is pressed (the setting when Reset
is pressed) (default: [Factory Default]).
1
For Enlarge Display, change settings in the copy or scan/fax mode.
% The default values in the both modes cannot be changed by one operation.
2
Press Menu, then tap [Accessibility] - [Default Enlarge Display Settings].
3
Select a mode to change settings.
% Select a mode that was displayed before tapping [Accessibility].
4
Select [Current Setting], then tap [OK].
% To return to the factory default settings, select [Factory Default].
3-8
Configuring Enlarge Display operations
d-Color MF552/452/362/282/222
3.4
Advertisement
Table of Contents
