Nvidia ForceWare Software User's Manual page 99

Migrating from RAID 0+1 to RAID 0
The following example shows you how to convert from a RAID 0+1 array with four disks
to a RAID 0 array with four disks.
1 Go to the system BIOS and make sure that the drives that you want to use are RAID
enabled.
2 Boot to Windows, launch the MediaShield application, then follow the steps outlined in
"Creating a Stripe Mirroring Array" on page 54
array. When that is done, you should see a screen shot similar to the following:
Figure 3.88
Now that a four-disk mirrored stripe array has been created, you can use the
MediaShield convert feature to migrate the array from a four-disk RAID 0+1 into a
four-disk RAID 0 array.
NVIDIA Corporation
RAID Array Created
Using the NVIDIA MediaShield RAID Management Utility
to create a four-disk mirrored stripe
C 3
HAPTER
95