Nvidia ForceWare Software User's Manual page 139

6 Click Finish.
The array rebuilding starts after a few seconds, and a small pop-up message appears
towards the bottom right corner of the screen as shown in
Figure 4.11
When the rebuilding process is finished you will see the pop up box shown
4.12.
Figure 4.12
During the rebuilding process, the NVIDIA MediaShield RAID Management utility
screen shows the status under the System Tasks and Details sections.
Figure 4.13
NVIDIA Corporation
Rebuild Bubble Message
Rebuild Finished Bubble Message
Array Rebuilding Status Detail
Initializing, Rebuilding, and Synchronizing RAID Arrays
Figure
C 4
HAPTER
4.11.
inFigure
135