Nvidia ForceWare Software User's Manual page 27

The RAID Config screen appears.
Figure 2.12
5 From the RAID Config window, globally enable RAID, then enable the SATA ports
with disks that you want to use for RAID.
If RAID is enabled globally but not enabled on the individual SATA port, disks on that
port can only be used for non-RAID applications.
In the example in
array can include up to four SATA disks. If there is a disk Connected to ʺSATA 3
Primary" or "SATA 3 Secondaryʺ, it cannot be used for RAID.
6 Press F10 to save the configuration and exit.
The PC reboots.
7 Enter the RAID BIOS Setup by pressing F10 when prompted, and proceed to set up the
RAID BIOS as described in the next section.
NVIDIA Corporation
Phoenix - Award BIOS CMOS Setup Utility
RAID Config
RAID Enable
SATA 1 Primary
SATA 1 Secondary
SATA 2 Primary
SATA 2 Secondary
SATA 3 Primary
SATA 3 Secondary
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults
RAID Config Screen
Figure 2.12, four SATA ports are enabled, so the non-bootable RAID
Item Help
[Enable]
RAID [Enabled]
RAID [Enabled]
Menu Level
RAID [Enabled]
RAID [Enabled]
RAID [Disabled]
RAID [Disabled]
F7: Optimized Defaults
Setting Up Your RAID Configuration
C 2
HAPTER
23