Nvidia ForceWare Software User's Manual page 32

C 2
HAPTER
Setting Up Your RAID Configuration
3 Use the arrow keys to select the array that you want to set up, then press B to specify
the array as bootable.
4 Press Enter to view and verify details.
The Array Detail screen appears.
Figure 2.18
The Array Detail screen shows various information about the array that you selected,
such as Striping Block used, RAID Mode, Striping Width, Disk Model Name, and disk
capacity.
5 If you want to mark this disk as empty and wipe out all its contents, press C.
6 At the prompt, press Y to wipe out all the data, otherwise press N.
7 Press Enter again to go back to the previous screen and then press F10 to exit the RAID
setup.
28
Array 2 : NVIDIA MIRROR 74.56G
RAID Mode: Mirroring
Striping Width : 1
Adapt Channel M/S
1 0 Master
1 1 Master
[R] Rebuild [D] Delete [C] Clear Disk [Enter] Return
Array Detail Screen
Array Detail -
-
Striping Block 32K
Index Disk Model Name
0 ST380023AS
1 ST380023AS
MediaShield User's Guide – Version 4.0
Capacity
74.56GB
74.56GB