Nvidia ForceWare Software User's Manual page 81

Migrating from RAID 0 (with One Disk) to RAID 1 (with Two Disks)
The following example shows you how to convert a RAID 0 array with one disk to a RAID
1 array (with two disks)
1 Go to the system BIOS and make sure that the drives that you want to use are RAID
enabled.
2 Boot to Windows, launch the MediaShield application, then follow the steps outlined in
"Creating a Striped Array" on page 47
disk instead of two disks.
When that is done, you should see a screen shot similar to the following:
Figure 3.60
3 Click click on Striping and select "Convert Array..." as shown in the following screen
shot:
Figure 3.61
NVIDIA Corporation
RAID Array Created
Selecting "Convert Array" from the Pop Up Menu
Using the NVIDIA MediaShield RAID Management Utility
with the exception that you need to select one
C 3
HAPTER
77