Nvidia ForceWare Software User's Manual page 158

C 7
HAPTER
MediaShield Application Notes
d Add NVIDIA storage drivers to the SCSI preload section.
e Add the message that will get displayed during text setup driver load.
4 Modify hivesft.inf to include the driver files location info into the DevicePath
registry key.
This tells the GUI mode setup where to find the driver files. Since this example places
them in ʺ%systemroot%\nvidia\nvraidʺ, that is what we use here:
Burning a CD
There are a number of tools that allow you to burn a bootable CD image. Here are some
tips when using Nero.
• Select CD-ROM [Boot] option
• Select the Boot tab and
•
•
•
•
•
• Select ISO 9660 Volume label to
•
•
154
GenNvRaidDisk
*_NVRAIDBUS
*NVRAIDBUS
Note: Your platform will likely have different device IDs, so you should modify
your entries accordingly.
[SCSI.Load]
nvatabus = NvAtaBus.sys,4
nvraid = nvraid.sys,4
[SCSI]
nvraid = "NVIDIA RAID CLASS DRIVER"
nvatabus = "NVIDIA nForce SATA Controller"
HKLM,"SOFTWARE\Microsoft\Windows\
CurrentVersion","DevicePath",0x00020002,"%SystemRoot%\
inf";"%systemroot%\nvidia\nvraid"
Set image to file in c:\slipstream\XP-BootImage
Select "Enable expert settings"
Set Kind of Emulation to No Emulation
Set load segment to 07C0
Set number of loaded segments to 4 (Very important!)
XP Professional enter WXPCCP_EN
XP Home enter WXHCCP_EN
= "nvraid"
= "nvraid"
= "nvraid"
MediaShield User's Guide – Version 4.0