Nvidia ForceWare Software User's Manual page 19

The RAID Config window appears.
Figure 2.3
4 From the RAID Config window, globally enable RAID, then enable the SATA ports
with disks that you want to use for RAID.
If RAID is enabled globally but not enabled on the individual SATA port, disks on that
port can only be used for non-RAID applications.
In the example in
array can include up to four SATA disks. If there is a disk connected to ʺSATA 3
Primary" or "SATA 3 Secondaryʺ, it can not be used for RAID.
5 Press F10 to save the configuration and exit.
The PC reboots.
NVIDIA Corporation
Phoenix - Award BIOS CMOS Setup Utility
RAID Config
[Enable]
RAID Enable
RAID [Enabled]
SATA 1 Primary
RAID [Enabled]
SATA 1 Secondary
RAID [Enabled]
SATA 2 Primary
RAID [Enabled]
SATA 2 Secondary
RAID [Disabled]
SATA 3 Primary
RAID [Disabled]
SATA 3 Secondary
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults
RAID Config Window
Figure 2.3, four SATA ports are enabled, so the non-bootable RAID
Setting Up Your RAID Configuration
Item Help
Menu Level
F7: Optimized Defaults
C 2
HAPTER
15