Table of Contents
Advertisement
Assigning a Dedicated Disk
To mark a disk as dedicated, or reserve it for use by a specific array, you must have at
least one free disk and you must also have at least two RAID 1, RAID 0+1, or RAID 5
arrays created. In this example, there are two mirrored arrays and two free disks.
Step 1: Mark the Disk as a Free Disk
1 Enter the system BIOS setup and make sure that the drive that you want to mark as free
is RAID enabled.
2 Boot into Windows and run the MediaShield program.
If the disk is not part of any RAID array, then it will appear under the Free Disk section
of the RAID GUI.
Step 2: Dedicate the Free Disk to an Array
While running MediaShield, dedicate a free disk to an array by doing the following:
1 Right click one of the two Mirrored arrays as shown below
Figure 3.8
NVIDIA Corporation
Designate Spare Pop-up Menu
Using the NVIDIA MediaShield RAID Management Utility
C
3
HAPTER
39
Advertisement
Table of Contents
