Nvidia ForceWare Software User's Manual page 119

Migrating from RAID 5 to RAID 0
The following example shows you how to convert a RAID 5 array with three disks to a
RAID 0 array with three disks.
1 Go to the system BIOS and make sure that the drives that you want to use are RAID
enabled.
2 Boot to Windows, launch the MediaShield application, then follow the steps outlined in
"Creating a RAID 5 Array" on page
When that is done, you should see a screen shot similar to the following:
Figure 3.119
3 Click on RAID 5 and select "Convert Array..." as shown in the following screen shot:
Figure 3.120
NVIDIA Corporation
RAID Array Created
Selecting "Convert Array" from the Pop Up Menu
Using the NVIDIA MediaShield RAID Management Utility
62.
C 3
HAPTER
115