Skewed Print - Lexmark X746 User Manual

Troubleshooting
C
ONTACT CUSTOMER SUPPORT
If the problem continues, the printer may need to be serviced.

Skewed print

Try one or more of the following:
C
HECK THE PAPER GUIDES
Adjust the length and width guides in the tray to the correct positions for the paper size loaded.
•
Make sure the guides are not too far from the paper stack.
•
Make sure the guides are not pressing too lightly against the paper stack.
C
HECK THE PAPER
Make sure you are using paper that meets the printer specifications.
M
AKE SURE THE PRINTER IS CLEAN OR IS NOT CONTAMINATED WITH PAPER DUST
Clean the exterior of the printer
1
Make sure that the printer is turned off and unplugged from the wall outlet.
Warning—Potential Damage: To avoid the risk of electric shock when cleaning the exterior of the printer,
unplug the power cord from the wall outlet and disconnect all cables to the printer before proceeding.
2
Remove paper from the standard exit bin.
3
Dampen a clean, lint-free cloth with water.
Warning—Potential Damage: Do not use household cleaners or detergents, as they may damage the finish of
the printer.
4
Wipe only the exterior of the printer, making sure to include the standard exit bin.
Warning—Potential Damage: Using a damp cloth to clean the interior may cause damage to your printer.
5
Make sure the paper support and standard exit bin are dry before beginning a new print job.
M
AKE SURE THE PAPER FEED ROLLERS ARE CLEAN AND ARE NOT CONTAMINATED WITH DUST
1
Turn the printer off using the power switch, and then unplug the power cord from the wall outlet.
2
Remove the paper feed rollers.
Note: For instructions on how to remove and reinstall the paper feed rollers, see the setup sheet that came with
the rollers inside the compartment box of Tray 1.
3
Dampen a clean, lint-free cloth with water.
315