Understanding the printer menus
Use
Color Dropout
Color Dropout
None
Red
Green
Blue
Default Red Threshold
0–255
Default Green Threshold
0–255
Default Blue Threshold
0–255
Contrast
0–5
Best for content
Mirror Image
Off
On
Negative Image
Off
On
Shadow Detail
‑4 to 4
Scan edge to edge
Off
On
Sharpness
1–5
Temperature
‑4 to 4
Sample Copy
Off
On
Fax Settings menu
Fax Mode (Analog Fax Setup) menu
Analog Fax Setup mode sends the fax job through a telephone line.
To
Specify which color to drop during copies, and how much to increase or decrease the
dropout.
Notes:
•
None is the factory default setting for Color Dropout.
•
128 is the factory default setting for each color threshold.
Specify the contrast used for the copy job.
Note: "Best for content" is the factory default setting.
Create a mirror image of the original document.
Note: Off is the factory default setting.
Create a negative image of the original document.
Note: Off is the factory default setting.
Adjust the amount of shadow detail visible on a copy.
Note: 0 is the factory default setting.
Specify if the original document is scanned edge-to‑edge.
Note: Off is the factory default setting.
Adjust the amount of sharpness of a copy.
Note: 3 is the factory default setting.
Enable the user to specify "warm" or "cool" outputs. "Cool" values generate a bluer
output than the default, while "warm" values generate a redder output than the
default.
Create a sample copy of the original document.
Note: Off is the factory default setting.
178