Setup Menu - Lexmark X746 User Manual

Understanding the printer menus
Print Settings

Setup menu

Use
Printer Language
PS Emulation
PCL Emulation
Job Waiting
On
Off
Print Area
Normal
Whole Page
Printer Usage
Max Yield
Max Speed
Black Only Mode
On
Off
To
Set the default printer language.
Notes:
•
PS Emulation is the factory default printer language. PS
emulation uses a PS interpreter for processing print jobs.
•
PCL Emulation uses a PCL interpreter for processing print
jobs.
• Setting a printer language as the default does not prevent a
software program from sending print jobs that use another
printer language.
Specify if print jobs are removed from the print queue when they
require unavailable printer options or custom settings. These print
jobs are stored in a separate print queue, so other jobs print
normally. When the missing information or options are obtained,
the stored jobs print.
Notes:
•
Off is the factory default setting.
•
This menu item appears only when a non-read‑only printer
hard disk is installed. This requirement ensures that stored
jobs are not deleted if the printer loses power.
Set the logical and physical printable area.
Notes:
• Normal is the factory default setting. When attempting to
print data in the non‑printable area defined by the Normal
setting, the printer clips the image at the boundary.
•
Whole Page allows images to be moved into the
non‑printable area defined by the Normal setting, but the
printer clips the image at the Normal setting boundary. This
setting affects only pages printed using a PCL 5e interpreter.
This setting has no effect on pages printed using the PCL XL
or PostScript interpreter.
Set the printer for a faster print speed or a higher toner yield.
Note: Max Yield is the factory default setting.
Set the printer to print text and graphics using only the black toner
cartridge.
Note: Off is the factory default setting.
202