Lexmark X746 User Manual page 196

Understanding the printer menus
Use
Scan Preview
Off
On
Allow Save as Shortcut
On
Off
Background Removal
‑4 to 4
Color Balance
Cyan - Red
Magenta - Green
Yellow - Blue
Color Dropout
Color Dropout
None
Red
Green
Blue
Default Red Threshold
0–255
Default Green Threshold
0–255
Default Blue Threshold
0–255
Contrast
0–5
Best for content
Mirror Image
Off
On
Negative Image
Off
On
Shadow Detail
‑4 to 4
Scan edge to edge
Off
On
Sharpness
1–5
To
Specify whether a preview will appear on the display for scan jobs.
Notes:
•
Off is the factory default setting.
•
Appears only when a printer hard disk is installed.
Enable shortcut creation for FTP addresses.
Note: On is the factory default setting.
Adjust the amount of background visible on a copy.
Note: 0 is the factory default setting.
Enable an equal balance of colors in the output.
Specify which color to drop during scanning, and how much to increase or decrease
the dropout.
Notes:
•
None is the factory default setting for Color Dropout.
•
128 is the factory default setting for each color threshold.
Specify the contrast of the output.
Note: "Best for content" is the factory default setting.
Create a mirror image of the original document.
Note: Off is the factory default setting.
Create a negative image of the original document.
Note: Off is the factory default setting.
Adjust the amount of shadow detail visible on a scanned image.
Note: 0 is the factory default setting.
Specify whether the original document is scanned edge-to-edge.
Note: Off is the factory default setting.
Adjust the amount of sharpness of a scanned image.
Note: 3 is the factory default setting.
196