Skewed Print - Lexmark MX81 Series Service Manual

Actions
Step 4
Check the following fuser components for wear or damage:
•
Gears
•
Exit rollers
•
Heat belt or hot roller
Are they free of damage?
Step 5
Reseat the connections on the LVPS.
Does the problem remain?

Skewed print

Actions
Step 1
a
Perform a print test:
Diagnostics menu > PRINT TESTS > Tray 1
b
Adjust the margins if necessary:
Diagnostics menu > REGISTRATION
Does the error remain?
Step 2
a
Check the media source.
b
If the media is from tray 1, go to step 3.
If the media is from the MPF, go to step 5.
Step 3
Make sure the pick roller tires are free of debris. Check for wear or
damage.
Are they free of wear or damage?
Yes
Go to step 5.
Replace the LVPS. See
"LVPS removal" on
page
Yes
Go to step 2.
Go to step 4.
Diagnostic information
44
No
Replace the fuser. See
"Fuser removal" on
page 347.
Problem solved.
403.
No
The problem is solved.
Replace the pick roller.
See "Pick roller
assembly removal" on
page 377.
7463