Troubleshooting - Nikon COOLPIX P310 Reference Manual

2=
o
o_
x
Troubleshooting
Problem
Monitor is blank.
Monitor is hard to
see,
Date and time of
recording are not
correct.
No information
displayed in
monitor.
Print date not
available.
Date is not
appeared on
pictures even
when Print date is
enabled.
Screen for setting
time zone and
date is displayed
when camera is
turned on,
Camera settings
reset.
_'_'_ Cause/Solution _'_
21
20
21
Camera is off
Battery is exhausted.
Standby mode for saving power: Press the power switch,
shutter release button, [] button or • (_ movie record)
button, or rotate the mode dial,
When flash lamp flashes, wait until flash has charged,
Camera and computer are connected via USB cable.
Camera and TV are connected via audio/video cable or HDMi
cable.
Interval timer shooting in progress.
Adjust monitor brightness.
Monitor is dirty, Clean monitor.
if the camera clock has not been set ("Date not set" indicator
flashes during shooting), still pictures have a time stamp of
"00/00/0000 00:00"; and movies are dated "01/01/12 O0:OOJ' S et
the correct date and time using Time zone and date in the
setup menu,
The camera clock is not as accurate as a normal clock, such as
watches. Check camera clock regularly against more accurate
timepieces and reset as required,
Hide info is selected for Photo info of Monitor settings in the
setup menu.
Time zone and date in the setup menu has not been set,
A shooting mode that does not support print date is selected.
Another function that is set now is restricting the print date,
The date cannot be imprinted onto a movie.
Clock battery is exhausted; all settings were restored to their
default values,
6O
86, 89
86,
_'B24
_'B44
98,_74
22, 98
_'B71
98,
_'B71
98,
_74
22, 98,
98,_76
75
23
_78