Nikon COOLPIX P310 Reference Manual page 41

8
£
o
Shooting
Menu
(P,S, A or M Mode)
Using Preset Manual
Use when you want to make pictures taken under unusual lighting conditions (e.g.,
lamps with reddishqight) look as though they were shot in normal light.
Use the procedure below to measure the white balance value under the lighting
used during shooting.
1 Place a white or gray reference object under the lighting that will be
used during shooting.
2 Display the shooting menu ([Z_54), use the
multi selector to set White balance to
PR[ Preset manual, then press the @ button.
• The lensextendsto the zoom position for
measurement.
3
Choose Measure.
• To apply the most recently measuredwhite balance
value,select Cancel and pressthe _) button. The most
recentlymeasured white balancevalue will be set
without re-measuringthe value.
4 Frame a white or gray reference object in the
reference object frame.
Reference object frar_e
5 Press the @ button to measure the white balance value.
• The shutter is releasedand the new white balancepresetvalue is set(no picture is
recorded).
L_ Noteon Preset Manual
The camera cannot measure a white balance value for when the flash fires. When shooting with the
flash, set White balance to Auto (normal), Auto (warm lighting) or Flash,