Nikon COOLPIX P310 Reference Manual page 78

The Setup Menu
Vibration Reduction
Press the MENU button "_ V tab (_]11 ) "_ Vibration reduction
Option Description
(@ On
(default setting)
Compensate camera shake that commonly occurs when
shooting at the telephoto zoom position or slow shutter speed.
Camera shake is also compensated when recording movies as
well as when shooting still images.The camera automatically
detects the panning direction and only compensates for vibration
caused by camera shake.
When the camera is panned horizontally, for example, vibration
reduction only compensates vertical shake. If the camera is
panned vertically, vibration reduction only compensates for
horizontal shake.
OFF
Off Vibration Reduction is not enabled.
• When using a tripod to stabilize the camera, set vibration reduction to Off.
When On is selected, an icon for this setting is displayed on the monitor (_6).
te
t_
5"
L_ Notes on Vibration Reduction
• After the power is turned on or the camera enters shooting mode from playback mode, wait until
the display stabilizes before shooting.
• Due to the characteristics of the vibration reduction function, images displayed on the monitor
immediately after shooting may appear blurry.
• Vibration reduction may be unable to completely eliminate the effects of camera shake in some
situations,
• When the Night landscape or Night portrait scene mode is set to Tripod, vibration reduction is
turned Off.
_77