Troubleshooting Wireless Lan And Ethernet Connections; Problems And Solutions - Nikon Z 8 Reference Manual

Troubleshooting Wireless LAN and
Ethernet Connections
Refer to this section for information on errors involving wireless LAN and Ethernet connections.
For information on the Wireless Transmitter Utility, see the utility's online help.

Problems and Solutions

Solutions to some common issues are listed below.
Problem
The camera displays a wireless error.
The camera displays a TCP/IP error.
The camera displays an FTP error.
"Connecting to computer" does not
clear from the camera display.
The camera displays the message,
"Ethernet cable is not connected".
The camera displays a "no memory
card" error.
Upload is interrupted and fails to
resume.
The connection is unreliable.
Connection settings require adjustment. Check settings
for the wireless router, FTP server, or host computer and
adjust camera settings appropriately (
Check the error code, if any. For more information, see
"Error Codes" ( 0 368).
Check firewall settings (
Select [USB-LAN] for [USB data connection] in the
network menu and then connect an Ethernet cable via
a third-party USB-to-Ethernet adapter inserted in the
camera's USB data connector (
The memory card is inserted incorrectly or not at all.
Check that card is inserted correctly (
Upload will resume if the camera is turned off and then
on again ( 364).
0
If the camera is connected in infrastructure mode, check
that the router is set to a channel between 1 and 8
( 770, 775).
0 0
Troubleshooting Wireless LAN and Ethernet
367
Solution
314,
0
319, 339).
0 0
0 328, 0 351,
82).
0
335).
0
0 786).
Connections