Nikon COOLPIX P310 Reference Manual page 114

Troubleshooting
Problem _I
Pictures and
movies cannot be
ed ited.
Pictures are not
displayed on
television,
Nikon Transfer 2
does not start
when camera is
connected to a
computer.
The PictBridge
startup screen is
not displayed
when the camera
is connected to a
printer.
Pictures to be
printed are not
displayed,
Cannot select
paper size with
camera.
_'_ Cause/Solution
Confirm the conditions that are required for editing pictures or
movies.
Pictures and movies taken with cameras other than COOLPIX
P310 ca n not be ed ited.
Video mode or HDMI is not correctly set in the TV settings
setup menu,
Cables are connected to both the HDMI mini connector and
USB/audio video connector.
Memory card contains no pictures. Replace memory card,
Remove memory card to play back pictures from internal
memory.
Camera is of_
Battery is exhausted.
USB cable is not correctly connected.
Camera is not recognized by the computer,
Confirm that the operating system used is compatible with
the camera,
Computer is not set to launch Nikon Transfer 2 automatically.
For more information on Nikon Transfer 2, refer to help
information contained in ViewNX 2.
With some PictBridge compatible printers, the PictBridge startup
screen may not be displayed and it may be impossible to print
images when Auto is selected for the Charge by computer
option. Set the Charge by computer option to Off and
reconnect the camera to the printer.
Memory card contains no pictures, Replace memory card,
Remove memory card to print pictures from internal memory.
Pictures taken by 3D photography cannot be printed.
Paper size cannot be selected from the camera in the following
situations, even for PictBridge compatible printers. Use the
_rinter to select paper size.
The paper size selected using the camera is not compatible
with the printer,
A printer that automatically sets the paper size is being used.
_17,
_32
100,
_82
86
18
21
2O
86
9O
100,
_84
18
19
,_'B8
_28,
-2-
ff
$
o_
_13