! Test tone
You can check the sound output from the speakers.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the DVD button.
3
Press the SET UP button.
4
Press the
or
button to select
"SPEAKER SETUP" and then
press the ENTER button.
5
Press the
or
button to select
"TEST TONE".
6
Press the
button and use the
or
button to select "ON".
7
Press the ENTER button.
Speakers emit the test tone for 2 seconds in turn, starting with the front speaker
(left).
Front speaker (left)
Centre speaker
Surround speaker (left)
8
To end the test tone, press the SET UP button.
Note:
When the listening mode is "STEREO", only the front speakers can be checked.
! Speaker level setting
If sounds from the speakers are uneven, you can equalise them by adjusting the
speaker levels.
1
2
3
4
SETUP MENU -- MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
AUDIO SETUP
PREFERENCES
-- SPEAKER SETUP PAGE --
CNTR DELAY
REAR DELAY
TEST TONE
ON
MAIN PAGE
OFF
-- SPEAKER SETUP PAGE --
CNTR DELAY
REAR DELAY
TEST TONE
ON
MAIN PAGE
OFF
Notes:
" The speaker type appears followed by "TREBLE", "BASS" and "MASTER VOL-
" For details on "TREBLE" and "BASS", see page 23.
Front speaker (right)
" The volume can still be adjusted even after "MASTER VOLUME" disappears.
" When the listening mode is "STEREO", you can change the level of the front
Surround speaker (right)
" If subwoofer sound is distorted, lower the subwoofer level.
Press the ON/STAND-BY button to turn the power on.
Press the DVD button.
Press the MODE button repeatedly to select the desired speaker.
Within 3 seconds, press the ADJ/
VOL + (VOL.UP +) or ADJ/VOL
(VOL.DOWN ) button to adjust
the level.
" You can adjust the level at 1 dB intervals.
" To adjust the levels of other speakers, repeat the operation from step 3.
Speaker type
FRONT LEFT
Front speaker (Left)
CENTER
Centre speaker
FRONT RIGHT
Front speaker (Right)
REAR RIGHT
Surround speaker (Right)
REAR LEFT
Surround speaker (Left)
SUBWOOFER
Subwoofer
UME".
speakers and the subwoofer.
HTCN400_500DVA_A4.fm
03/10/24
HT-CN400DVA
HT-CN500DVA
CENTER 3DB
Level range
Default
setting
- 15 DB to + 10 DB
0 DB
- 15 DB to + 10 DB
0 DB
- 15 DB to + 10 DB
0 DB
- 15 DB to + 10 DB
0 DB
- 15 DB to + 10 DB
0 DB
- 15 DB to + 10 DB
0 DB
45
92LCN400A0270
8