Test Tone - Sharp SD-AS10H Operation Manual

! Speaker level setting
If sounds from the speakers are uneven, you can equalise them by adjusting the
speaker levels.
1
Set the MODE 1/MODE 2 switch to MODE 2 and press the AMP SET
UP button.
2
Within 10 seconds, press the or
select "SP LEVEL", and press the ENTER but-
ton.
3
Within 10 seconds, press the or
select the desired speaker.
The indicator of the selected speaker flashes.
4
Within 10 seconds, press the or
adjust the level.
" You can adjust the level at 1 dB intervals.
" To adjust the levels of other speakers, repeat the op-
eration from step 3.
5
Press the RETURN button twice.
The setting is complete.
Speaker type
FL Front speaker (left) - 6 dB to + 6 dB
CT Centre speaker - 6 dB to + 6 dB
FR Front speaker (right) - 6 dB to + 6 dB
SR Surround speaker (right) - 6 dB to + 6 dB
SL Surround speaker (left) - 6 dB to + 6 dB
SW Subwoofer - 10 dB to + 10 dB
Note:
If subwoofer sound is distorted, lower the subwoofer level.

! Test tone

You can check each speaker sound by a test tone. Readjust the volume set in
"Speaker level setting".
1
2
button to
button to
L C R
SW
LS RS
button to
L C R
3
SW
LS RS
Level range Default setting
0 dB
0 dB
0 dB
0 dB
0 dB
+ 3 dB
Set the MODE 1/MODE 2 switch to MODE 2 and press the AMP SET
UP button.
Within 10 seconds, press the or button to
select "TONE", and press the ENTER button.
The test tone will be heard from each speaker, in order, at about 2-second inter-
vals.
FL CT
SW SL
To adjust speaker levels
Whilst the test tone is heard:
Adjust the level with the or button.
Press the or to select a speaker.
Press the RETURN button twice.
The setting is complete.
05/3/17 SD-AS10H_SEEG_E.fm
SD-AS10H
ENGLISH
FR
SR
E-48
TINSZA116AWZZ
D
F
S
V
I
N
P
E