Speaker Level Setting; Test Tone - Sharp HT-CN300H Operation Manual

Speaker level setting

If sounds from the speakers are uneven, you can equalise them by adjusting the
speaker levels.
1
Press the SET UP button.
2
Within 10 seconds, press the or
and press the ENTER button.
3
Within 10 seconds, press the or
speaker.
4
Within 10 seconds, press the or
TV screen
You can adjust the level at 1 dB intervals.
To adjust the levels of other speakers, repeat the operation from step 3.
You can complete the setting operation by pressing the SET UP button twice.
Speaker type
FL Front speaker (Left)
CT Centre speaker
FR Front speaker (Right)
SR Surround speaker (Right)
SL Surround speaker (Left)
SW Subwoofer
Note:
Adjust the level of the subwoofer if the sound from it is distorted.
You can check the sound output from the speakers. (If the speaker levels are not
equalised, they can be adjusted, too.)
1
2
button to select "SP LEVEL",
button to select the desired
button to adjust the level.
3
If the levels are not equal:
Whilst the test tone sounds, press the
You can select a speaker by pressing the
Note:
Adjustable range
If NO (OFF) is selected for a speaker in the speaker size setting, no test tone will be
- 6 dB + 6 dB
heard from it.
- 6 dB + 6 dB
- 6 dB + 6 dB
- 6 dB + 6 dB
- 6 dB + 6 dB
- 10 dB + 10 dB

Test tone

Press the SET UP button.
Within 10 seconds, press the or button to select "TONE", and
press the ENTER button.
The test tone will be heard from each speaker, in order, at about 2-second inter-
vals.
FL CT
SW SL
To finish checking, press the SET UP button twice.
or to adjust the level.
or button.
02/6/17 HT-CN300H_(E)4.fm
HT-CN300H
FR
SR
37