Cd Operation; To Play In The Desired Order (Programmed Play) - Sharp HT-CN400DVA Operation Manual

CD operation

HT-CN400DVA
HT-CN500DVA
The following playback functions are the same as DVD or VCD opera-
tions.
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
To locate the beginning of a chapter (track) (skip) . . . . . . . . . . . . . . . . . . . . . . 26
Fast forward/Fast reverse (search) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
To play repeatedly (repeat play) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
To play the contents between the specified points repeatedly (A-B repeat) . . 31
To change the audio channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
To change the display on TV screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
To start playback from the desired point (direct play) . . . . . . . . . . . . . . . . . . . . 35
OPEN/
CLOSE
TITLE
MENU/PBC
PROG
PROG
SLOW/MEMORY
PRESET
LISTENING
1
5
9
DIRECT
ANGLE
36
ON/
STAND-BY
SET UP MUTE
SUBTITLE LANGUAGE DISPLAY
ST/MO
ENTER
SLEEP
TUNING
MODE ADJ/VOL
1 2 3 4
2 3 4
6 7 8 5 6 7 8
STEP
>10
0
> 10
9 0
RETURN REPEAT A-B
ZOOM AUDIO NTSC/PAL
REPEAT
! To play in the desired order
(programmed play)
Page
You can play back the desired tracks in a specific order.
Maximum of 99 tracks can be programmed.
When playing SVCD or VCD, cancel the P .B.C. (playback control) (see page 35).
1
Whilst stopped, press the PROG button.
TV screen
PROGRAM P00:00
2
Enter a track number with the direct number buttons.
PROGRAM P01:02
" Repeat the procedure above to enter other track numbers.
" If you enter the wrong number, press the PROG button and then start over
from step 1.
" If the track number is 2 digits or more, press ">10" and enter the number.
Example:
To select track 14: Press ">10" and "4".
3
Press the / button to start play.
To change the programmed contents:
Repeat the above procedures from step 1.
Programmed contents will be cleared when you perform the following
operations:
" Press the
or PROG button in the stop mode.
" Switch the input or remove the discs.
" Set to the stand-by mode.
Notes:
" Programming is not possible whilst paused or during playback.
" Sequential programming does not work if the disc disables programming or does
not have track information.
" During programmed play, repeat play can be performed by pressing the REPEAT
button (see page 30).
HTCN400_500DVA_A3.fm
03/10/24
Unit display
PROG
PRESET CHP PROG SLEEP REPEAT 1 A - B
KHz
MHz
PRESET CHP PROG SLEEP REPEAT 1 A - B
KHz
MHz
92LCN400A0270