Connecting The Ac Power Lead; Audio Connection To Other Equipment - Sharp HT-CN400DVA Operation Manual

To listen to TV or VCR sound via the speakers of this unit:
Press the AUX button repeatedly to select the desired audio input.
" For the TV, select "AUX
OPEN/ ON/
CLOSE STAND-BY
1 IN".
SET UP MUTE
TITLE SUBTITLE LANGUAGE DISPLAY
" For the VCR, select
MENU/PBC ST/MO
"AUX 2 IN".
ENTER
PROG SLEEP
" Alternatively, press the FUNCTION button on
the main unit.

! Audio connection to other equipment

Audio signal
Audio cable
(commercially available)
Notes:
" Change the TV input in accordance with the connected socket.
" Do not connect other equipment (VCR, etc.) between the TV and this unit. Pic-
tures may be distorted.
" Refer to the operation manual of the equipment to be connected.
" Insert the plugs fully to avoid fuzzy pictures or noise.

! Connecting the AC power lead

After checking all the connections have been made correctly, plug the AC power lead
of this unit into the wall socket.
Unit display
ESET CHP PROG SLEEP REPEAT 1 A - B
KHz
MHz
ESET CHP PROG SLEEP REPEAT 1 A - B
KHz
MHz
(AC 220 - 240 V, 50/60 Hz)
To audio MD recorder
input socket
Note:
Unplug the AC power lead from the wall socket if the unit will not be used for a pro-
longed period of time.
03/10/24
Wall socket
HTCN400_500DVA_A2.fm
HT-CN400DVA
HT-CN500DVA
2
15
92LCN400A0270