Sharp HT-CN400DVA Operation Manual page 19

Setup menu Selectable parameters (* indicates default settings.)
GENERAL SETUP
-- GENERAL PAGE --
TV DISPLAY
TV TYPE
OSD LANG
SCR SAVER
MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
-- SPEAKER SETUP PAGE --
CNTR DELAY
REAR DELAY
TEST TONE
MAIN PAGE
LOUD SPEAKERS SETUP
AUDIO SETUP
-- AUDIO SETUP --
DYNAMIC
MAIN PAGE
AUDIO RELATED
(*1)
Selects the dynamic range compression to fit the individual listening situation of the audience. This function can be used in DVD playback.
Depending on the disc, sounds may become too loud or inaudible during playback. Dolby Digital's dynamic range control allows you to adjust the sound range.
TV DISPLAY NORMAL/PS
NORMAL/LB *
NORMAL/PS
NORMAL/LB WIDE
WIDE
TV TYPE MULTI *
NTSC
PAL
OSD LANG ENGLISH *
FRENCH
GERMAN
ITALIAN
SPANISH
SCR SAVER ON
OFF *
CNTR DELAY 1 MS to 5 MS
OFF *
5MS
REAR DELAY 3 MS to 15 MS
3MS
OFF *
1MS
TEST TONE ON
OFF
OFF *
DYNAMIC (*1) FULL *
7/8
FULL
6/8
1/8
4/8
OFF
2/8
OFF
Description
The screen mode should be set according to the connected TV
type (for details, see page 21).
Selects the correct colour system (TV standard) (for details, see
page 21).
You can select the desired OSD (On Screen Display) language for
the setup menu or playback control screen.
A screensaver appears.
The screensaver is disabled.
Adjust the delay time of the speakers (for details, see page 44).
You can check the sound output from the speakers (for details,
see page 45).
Audio with fully compressed dynamic range.
Audio with partially compressed dynamic range.
Audio with uncompressed dynamic range.
HTCN400_500DVA_A2.fm
03/10/24
HTCN400_500DVA_A 92LCN400A0270
HT-CN400DVA
HT-CN500DVA
19
92LCN400A0270
4
3