To Change The Angle; To Zoom Images (Zoom) - Sharp HT-CN400DVA Operation Manual

OPEN/ ON/
CLOSE STAND-BY
SET UP MUTE
TITLE SUBTITLE LANGUAGE DISPLAY
MENU/PBC ST/MO
ENTER
PROG SLEEP
SLOW/MEMORY
PRESET TUNING
LISTENING MODE ADJ/VOL
1 2 3 4
5 6 7 8
STEP
>10
9 0
DIRECT RETURN REPEAT A-B
ANGLE
ANGLE ZOOM AUDIO NTSC/PAL

! To change the angle

You can change the angle of view when playing a DVD disc that contains scenes
recorded from multiple angles.
When " " is displayed in the upper right corner of the TV screen,
press the ANGLE button repeatedly to select the desired angle
number.
Notes:
" The angle number is not displayed if angles are not recorded on the disc.
" Refer to the manual of the disc as the operation may vary depending on the disc.

! To zoom images (zoom)

You can magnify images during playback.
1
Whilst a disc is playing, press the ZOOM
button.
Each press of the ZOOM button cycles through the zoom settings as follows:
ZOOM X1.5
ZOOM
2
To shift the view and display the de-
sired part of a zoomed image, press
the , , or
To return to normal view:
Press the ZOOM button repeatedly to select "ZOOM OFF".
Notes:
" Images may become distorted when zoomed.
" Subtitles cannot be zoomed.
03/10/24
ZOOM X1.5
ZOOM X2 ZOOM X3 ZOOM OFF
button repeatedly.
HTCN400_500DVA_A3.fm
HT-CN400DVA
HT-CN500DVA
4
29
92LCN400A0270