Sleep Operation; Setting The Sleep Timer - Sharp HT-CN400DVA Operation Manual

Sleep operation

HT-CN400DVA
HT-CN500DVA
OPEN/
CLOSE
TITLE
MENU/PBC
PROG
SLOW/MEMORY
LISTENING
DIRECT
ANGLE
46
ON/
STAND-BY
ON/
STAND-BY
SET UP MUTE
SUBTITLE LANGUAGE DISPLAY
ST/MO
ENTER
SLEEP
SLEEP
PRESET TUNING
MODE ADJ/VOL
1 2 3 4
5 6 7 8
STEP
9 0 >10
RETURN REPEAT A-B
ZOOM AUDIO NTSC/PAL

! Setting the sleep timer

You can set the unit to the power stand-by mode at the specified time.
1
Play back the desired sound source.
2
Press the SLEEP button.
TITLE TRK PRESET CHP PROG
DIGITAL
Pro Logic
STEREO V CD MP3
To change the sleep time:
Press the SLEEP button repeatedly to select the desired sleep time. The time will
decrease as follows.
15 MIN 30 MIN
OFF 120 MIN
3
Your system will enter the power stand-by mode automatically af-
ter the preset time has elapsed.
To cancel the sleep operation:
Press the ON/STAND-BY button whilst "SLEEP" is indicated.
To cancel the sleep operation without setting the system to the stand-by mode, press
the SLEEP button until "OFF" appears on the display.
To confirm the remaining sleep time:
Press the SLEEP button whilst the sleep timer is set.
The remaining sleep time is displayed for about 3 seconds.
Caution:
This unit cannot set the sleep timer of other equipment.
To use the sleep timer using other equipment, you should also set the timer on
the equipment separately.
HTCN400_500DVA_A5.fm
03/10/24
SLEEP
SLEEP REPEAT 1 A - B
KHz
MHz
45 MIN
90 MIN 60 MIN
92LCN400A0270