Various Settings; To Change The Subtitle Language; To Change The Audio Language (Audio Output) - Sharp HT-CN400DVA Operation Manual

Various settings

HT-CN400DVA
HT-CN500DVA
The subtitle language, audio language and TV type you select during playback are
reset each time you set this unit to the stand-by mode or switch the input. To keep
your own settings, set them in the setup menu (see page 18).
SUBTITLE
AUDIO
32
DISPLAY
OPEN/ ON/
CLOSE STAND-BY
SET UP MUTE
TITLE SUBTITLE LANGUAGE DISPLAY
LANGUAGE
MENU/PBC ST/MO
ENTER
PROG SLEEP
SLOW/MEMORY
PRESET TUNING
LISTENING MODE ADJ/VOL
1 2 3 4
5 6 7 8
STEP
>10
9 0
DIRECT RETURN REPEAT A-B
NTSC/PAL
ANGLE ZOOM AUDIO NTSC/PAL

! To change the subtitle language

You can change the subtitle language or hide subtitles during playback.
Whilst a disc is playing, press the SUBTITLE
button repeatedly to select the desired subtitle
language.
Notes:
" On some discs, the subtitle language cannot be changed.
" If no subtitles are recorded on the disc, "SUBTITLE OFF" is displayed.
" It may take time to switch the subtitle language to the selected one.
" Subtitles cannot be hidden on some DVDs.
! To change the audio language
(audio output)
During playback, you can change the audio language (audio output).
Whilst a disc is playing, press the LANGUAGE
button repeatedly to select the desired audio
number.
You can select recorded languages.
ENGLISH FRENCH
Notes:
" On some discs, the audio language cannot be changed.
" For the audio language and audio system, refer to the manual of the disc.
HTCN400_500DVA_A3.fm
03/10/24
SUBTITLE 01/03: ENGLISH
AUDIO 2/8: AC-3 5.1CH ENGLISH
...
SPANISH
92LCN400A0270