Error Indicators And Warnings; Maintenance; Specifications - Sharp HT-CN400DVA Operation Manual

Error indicators and warnings

When you load an unplayable disc or fail to perform operations properly, the following
messages are displayed on the unit and the TV screen.
Unit display
" The disc is not loaded.
TITLE TRK PRESET CHP PROG SLEEP REPEAT 1 A - B
" The disc is scratched or dirty and cannot be recog-
KHz
MHz
nised.
" The disc is loaded up-side down.
" The region number of the DVD is not 4 or ALL.
TITLE TRK PRESET CHP PROG SLEEP REPEAT 1 A - B
KHz
MHz
3
TV screen
" The disc is not loaded.
NO DISC
" The disc is scratched or dirty and cannot be
recognised.
" The disc is loaded up-side down.
" The region number of the DVD is not 4 or
WRONG CODE ALL.

Maintenance

! Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a
dry cloth.
" Do not use chemicals for cleaning (petrol, paint thinner, etc.). It may damage the
cabinet finish.
" Do not apply oil to the inside of the unit. It may cause malfunctions.

Specifications

As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
Meaning
" General
Power source
Power consumption
Meaning
Dimensions
Weight
Audio input terminals
Audio output
terminals
Video output
terminals
" Amplifier (HT-CN400DVA)
Output power
AC 220 - 240 V, 50/60 Hz
HT-CN400DVA:
Power on: 88 W
Power stand-by: 0.6 W
HT-CN500DVA:
Power on: 105 W
Power stand-by: 0.6 W
Width: 430 mm (16-7/8")
Height: 53 mm (2-1/8")
Depth: 337 mm (13-1/4")
4.2 kg (9.3 lbs.)
Analogue input (IN 1): RCA type 1 pair (L/R)
Analogue input (IN 2): RCA type 1 pair (L/R)
Analogue output (OUT): RCA type 1 pair (L/R)
Headphones: 16 - 50 ohms (recommended: 32 ohms)
S-video output: S-terminal 1
Video output: RCA type 1
Front speakers:
RMS: 60 W (30 W + 30 W) (10 % T.H.D., 1 kHz)
Centre speaker:
RMS: 30 W (10 % T.H.D., 1 kHz)
Surround speakers:
RMS: 60 W (30 W + 30 W) (10 % T.H.D., 1 kHz)
Subwoofer:
RMS: 50 W (10 % T.H.D., 100 Hz)
HTCN400_500DVA_A5.fm
03/10/24
HT-CN400DVA
HT-CN500DVA
9
49
92LCN400A0270