Removing The Paper Roll - Sharp XE-A212 Instruction Manual

A212_5 OPERATOR MAINTENANCE

Removing the paper roll

When a red dye appears on the paper roll, it is time to replace it. Replace the paper roll with a new one. If you
plan on not using the register for an extended period of time, remove the paper roll, and store it in an appropriate
place.
Caution: The paper cutter is mounted on the printer cover. Be careful not to cut yourself.
When not using the take-up spool (using as receipt paper):
Print roller
release lever
When using the take-up spool (using as journal paper):
03.7.5 7:53 AM Page 75
1.
Remove the printer cover.
Print roller arm
2.
Lift up the print roller release lever to unlock and open the print
roller arm.
3.
Remove the paper roll from the paper roll cradle.
1.
Turn the mode switch to a position other than "
Area to cut
power cord connected.
2.
Remove the printer cover.
3.
Press the
part is out of the way.
4.
Cut the paper and remove the take-up spool.
5.
Lift up the print roller release lever to unlock and open the print
roller arm.
6.
Remove the paper roll from the paper roll cradle.
Do not pull the paper through the printer.
F
key to advance the journal paper until its printed
Do not pull the paper through the printer.
7.
Remove the outer side of the take-up spool as shown
on the left.
8.
Remove the printed journal roll from the take-up spool.
" with the
75