Optional Features; Auxiliary Entries; Percent Calculations (Premium Or Discount) - Sharp XE-A212 Instruction Manual

A212_2 FOR THE OPERATOR
Manual tax 1-4 system (Manual entry method using preset percentages)
s
This system provides the tax calculation for taxable 1 through 4 subtotals. This calculation is performed using
the corresponding programmed percentages when the
After this calculation, you must finalize the transaction.
Automatic VAT 1 and automatic tax 2-4 system
This system enables the calculation in the combination with automatic VAT 1 and automatic tax 2 through 4. The
combination can be any of VAT1 corresponding to taxable 1 and any of tax 2 through 4 corresponding to taxable
2 through taxable 4 for each item. The tax amount is calculated automatically with the percentages previously
programmed for these taxes.
• The tax status of PLU/subdepartment depends on the tax status of the department which the
PLU/subdepartment belongs to.
• VAT/tax assignment symbol can be printed at the fixed right position near the amount on the
receipt as follows:
When the multiple VAT/tax is assigned to a department or a PLU, a symbol of the lowest number
assigned to VAT/tax rate will be printed. For programming, please refer to "Various Function
Selection Programming 1" (Job code 66) on page 53.

OPTIONAL FEATURES

1

Auxiliary Entries

Percent calculations (premium or discount)

Your register provides the percent calculation for the subtotal and/or each item entry depending on the
programming.
• Percentage: 0.01 to 100.00% (Depending on the programming)
Application of preset rate (if programmed) and manual rate entry are available.
Percent calculation for subtotal
Key operation example
03.7.5 8:01 AM Page 21
t
VAT1/tax1
VAT2/tax2
VAT3/tax3
VAT4/tax4
@
4
'
140
™
s
%
10
A
t
key is pressed just after the
A
B
C
D
Receipt print
s
key.
21