Text Programming - Sharp XE-A212 Instruction Manual

A212_3 FOR THE MANAGER
*1:Item:
A Footer printing*
B Amount tendered entry*
C Entry digit limit
*When programming for
Footer printing (only for
• This programming decides whether or not the machine should print a message at the foot of a receipt when a
specified media key is used. With regard to programming method of footer logo message, refer to "Logo
messages" section on page 46.
Amount tendered entry (only for
• You may select amount tendered, compulsory or optional, for the
• You may select amount tendered, compulsory or inhibited, for the
Entry digit limit
X Y c
• For the , ,
A
the key, program upper limit entry for total cash amount which can be handled on the register. The entry
digit limit is in effect for REG mode operation but can be overridden in the MGR mode. The entry digit limit is
represented by the number of allowable digits for the maximum entry or total amount. When "0" is set, the
operation of the corresponding key is prohibited.
Key operation example

Text Programming

4
The register allows you to program texts for department item names, PLU/subdepartment item names, function
texts, clerk names, logo messages, foreign and domestic currency symbols, and training mode texts. Please
refer to "Guidance for text programming" on page 31 as for how to entering characters.
When you press an appropriate number key (job code number) and press the
start programming with the
Then a little after displaying guidance message indicating what programming you are in, the register may ask
you to enter the first parameter, such as dept. code. Referring to the corresponding "Procedure", enter a
parameter and start character entries.
Department text (item label)
s
1
03.7.5 8:02 AM Page 43
r o
or , always enter 0 for A and B.
X Y c b
, , , and
X Y c
, , ,
b r o
, , and keys program upper limit entry amount for the tendered amount. For
@
018
X A
s
key, the cash register will automatically be ready for text entry.
(16 digits)
P
Dept. key
Dept. code
(1 to 50)
To program another dept.
Selection:
Allow
Disallow*
Compulsory
X Y
Non-compulsory (for , and
c b
Inhibit (for and )*
X Y c b A
For , , , and
r o
For and
A
)
b A
and )
A X
,
c
and
Print
To keep current setting
Character keys
(max.16 digits)
d
Entry:
1
0
1
A
)* 0
0
0-8 (default:8)
0-9 (default:9)
Y
and keys.
b
keys.
From left, ABC
P
key for text entry just after you
s A
43