Error Messages - Sharp IM-DR420H Operation Manual

Error Messages

IM-DR420H
ENGLISH
ERROR
MESSAGES
" The battery has run down.
BATT EMPTY
" Nothing is recorded.
BLANK MD
(Replace the disc with a recorded disc.)
" You tried to record from a copy prohib-
Can't COPY
ited MiniDisc.
(Record using the analogue cable.)
" You tried to record signals other than
music (such as data).
" A track cannot be edited.
Can't EDIT
(Change the stop position of the track and
then edit it.)
" You tried to remove the MD whilst re-
Can't LOCK
cording or editing.
" You tried to play back a track that can-
Can't PLAY
not be played with this equipment.
Can't READ (*) " The disc data cannot be read because
the disc is damaged.
(Reload the Minidisc or replace it with an-
other one.)
" Recording cannot be performed cor-
Can't REC
rectly due to vibration or shock.
E-49
IM-DR420H TINSZ0964AWZZ
MEANING ERROR
MESSAGES
Can'tSTAMP " Stamp function does not work.
Can'tWRITE
DEFECT!
DISC FULL
Er-MD (**)
HOLD
LOCKED
NO DISC
A number or symbol appears in (*) position.
03/7/21
MEANING
(Check the number of tracks.)
" Cannot save the TOC information cor-
rectly to a MiniDisc.
" The disc is scratched.
(If the recorded sound is not right, retry re-
cording or replace the disc with a recordable
one.)
" The disc is out of recording space.
" The microprocessor has reported a sys-
tem fault and the unit is out of order.
(To have it repaired, go to the distributor
where you purchased the unit.)
" The unit is in the hold mode.
" You removed a MiniDisc whilst recording
or editing.
(Turn off the power before removing the
MiniDisc.)
" A disc has not been loaded.
IM-DR420H_SEEG_E.fm