Recording From A Microphone - Sharp IM-DR420H Operation Manual

Recording from a Microphone

To the MIC IN
Stereo
( PLUG IN )
microphone
POWER
(commercially
socket
available)
1
Connect a stereo microphone to the MIC IN socket.
2
Insert a recordable MiniDisc (page 10).
3
Press the REC button.
4
Press the MENU/ENTER button.
IM-DR420H TINSZ0964AWZZ
5
Press the or button repeatedly to select "Mic
Level".
6
Press the MENU/ENTER button.
7
Press the or button repeatedly to select "Au-
to-Hi", "Auto-Lo" or "MANUAL".
" When "Auto-Hi" or "Auto-Lo" is selected, the record-
ing level is automatically adjusted according to
changes in sound volume. Normally select "Auto-Hi".
When the recording level frequently reaches
"OVER", switch to "Auto-Lo" to lower the level. Set
the maximum level between "-4 dB" and "0 dB".
" The automatic level adjustment may be delayed by a
few seconds where source sounds show sudden and
rapid changes (especially in meetings and conversa-
tions). In this case adjust the recording level manual-
ly (see page 27).
8
Press the MENU/ENTER button.
The mode will be set automatically after 7 seconds even
if the MENU/ENTER button is not pressed.
9
Select the recording mode (steps 1 - 5, page 21).
10
Press the button.
Recording will start.
03/7/21 IM-DR420H_SEEG_E.fm
IM-DR420H
ENGLISH
E-26