Sharp IM-DR420H Quick Start Manual

1-BIT PORTABLE MINIDISC RECORDER
Quick Start Guide
MODEL
IM-DR420H
If you require any advice or assistance regarding
your Sharp product, please visit our web-site
www.sharp.co.uk/customersupport.
Customers without Internet access may telephone
08705 274277 during office hours (or (01) 676 0648
if telephoning from Ireland).
Connections
To connect to a stereo system with "LINE OUT" or "AUDIO OUT" sockets
(analogue connection)
If the audio system has only one pair of sockets, they are usually for input only
and recording via this connection is not possible.
To the OPTICAL/
LINE IN socket
NOTE:
Refer to page 15 (operation manual) for
connecting the unit to a stereo system with
"DIGITAL OUT" or "OPTICAL OUT" socket.
When recording from a CD or MiniDisc
1
Press the REC button.
2
Begin playback on the stereo system con-
nected to this portable MD.
3
Press the REC LEVEL or
adjust the recording level.
0 - 30
Adjust the recording level so that the maximum
sound volume from the source makes the reading
swing somewhere between -4 dB and 0 dB.
4
Press the PAUSE button on the stereo sys-
tem to enter the playback pause mode.
Here you can search for the track to be recorded.
Whilst "TOC" is displayed, the recorded contents are not yet updated.
To stop recording
Press the :OFF/HOLD button.
When recording is stopped, TOC is written on the MD. The "TOC" indicator disappears.
TINSE0555AWZZ
03G R YT 1
Stereo etc.
Supplied
R IG
H T
L E F
T
connection
cable
R IG
H T
L E F
T
Red : to right
White : to left
Record on a recordable MiniDisc
button to
TOC display
Connect the AC adaptor
To the
wall socket
To the DC IN
AC 110 - 240V,
3V socket
50/60 Hz
Insert a MiniDisc
1
2
3
4
1
4
3
When you record on a MiniDisc, check
that the erase prevention tab is set to
Insert according to
the "Recordable" position.
the direction arrow.
5
Select the recording mode.
1 Press the MENU/ENTER button.
Press the
2
"REC MODE".
3
Press the MENU/ENTER button.
Press the
4
the recording mode.
Press the MENU/ENTER button.
5
6
Press the
7
Begin playback on the stereo system, the
output will be recorded.
The unit does not work if the HOLD button is set to HOLD.
Hold down the HOLD button for 2 seconds or more.
Hold
Plug the AC adaptor into the
wall socket, and then insert the
plug on the other end into the
DC IN 3V socket.
Caution:
Insert the plugs firmly.
When the unit is not in use for ex-
tended periods, remove the AC
adaptor from the wall socket.
Slide the OPEN lever to release the
compartment door.
Lift up the compartment door.
Insert a MiniDisc.
Close the compartment door.
Close Open
Recordable Recording prevented
or button repeatedly to select
or button repeatedly to select
SP (Stereo recording)
(2 times long recording)
(4 times long recording)
(Monaural recording)
button to start recording.
Release