Changing Default Settings - Sharp IM-DR420H Operation Manual

Changing Default Settings

Whilst in the stop mode ...
1
With a MiniDisc inserted, press the MENU/ENTER but-
ton for 2 seconds or more. "SET UP" will appear.
When you release the button, "BEEP" will flash.
2
Press the or button to select the menu.
3
Press the MENU/ENTER button to display the setting
item.
4
Press the or button to select the setting items.
5
Press the MENU/ENTER button.
MENU
BEEP (Confirmation BEEP ON*
sound)
BEEP OFF
AUTO PLAY (Auto play) A-PLAY ON*
A-PLAY OFF
POWER SAVE (Auto AUTO Psave*
power save)
Psave OFF
D-LEVEL (Digital record- D.L MODE 1*
ing level)
D.L MODE 2
10
(*) indicates default setting.
IM-DR420H TINSZ0964AWZZ
! Beep sound
You can eliminate the confirmation sound that beeps when
you press a button.
! Auto play
You can make the unit not play automatically when you insert
a playback-only MiniDisc or an accidental erasure protected
MiniDisc.
! Auto power save
When the unit is used in a place exposed to much vibration,
sound skipping can be decreased by cancelling the auto
power save function. (Battery will drain faster.)
What is auto power save function?
During playback, maximum 40 seconds (in stereo) of musical
information is stored. Auto power save function automatically
SETTING ITEM
adjusts the storage time between 5 and 40 seconds to
Beep
reduce the power consumption. If this function is cancelled,
the storage time cannot be adjusted.
Silent
" If this unit is used with the AC adaptor, the storage time
will be 40 seconds regardless of the settings.
Set.
" The storage time varies depending on the recording
mode.
Cancelled.
! Digital recording level
Set.
"D.L MODE 1"
Cancelled.
The digital recording level you set will be kept even after
cancelling recording.
Setting re-
"D.L MODE 2"
tained.
Every time you cancel recording, the level will return to
Cancelled.
[D.L 0dB].
IM-DR420H
ENGLISH
E-30
03/7/21 IM-DR420H_SEEG_E.fm