Using With The Ac Adaptor; Using With The Alkaline Battery - Sharp IM-DR420H Operation Manual

Using with the AC Adaptor

IM-DR420H
ENGLISH
Plug the AC adaptor into the wall socket, and then insert
the plug on the other end into the DC IN 3V socket.
To the wall socket
AC 110 - 240V,
50/60 Hz
To the DC IN 3V socket
Caution:
" Insert the plugs firmly.
" When the unit is not in use for extended periods,
remove the AC adaptor from the wall socket.
Notes:
" If power failure occurs whilst playing a disc using the
AC adaptor, disconnect it from the wall socket. Other-
wise, playback may start automatically when electricity
resumes.
" This unit can be used with the AC adaptor when the
rechargeable or an alkaline battery is in the unit.
E-9
IM-DR420H TINSZ0964AWZZ

Using with the Alkaline Battery

Use one commercially available alkaline battery (LR6,
"AA" size).
1
2 3
1
Push and slide the battery cover.
2
Open the battery cover.
3
Insert an alkaline battery according to the direc-
tion indicated in the battery compartment.
When inserting or removing the battery, push it to-
wards the battery terminal.
4
Close the battery cover.
Notes:
" Do not replace the battery during operation.
" Do not use a nickel-cadmium battery.
" Remove the battery if the unit will not be used for long
periods of time. This will prevent potential damage due
to battery leakage.
" Installing the battery incorrectly may cause the unit to
malfunction.
03/7/21 IM-DR420H_SEEG_E.fm