Sharp IM-DR420H Operation Manual page 36

Recording from a Microphone (continued)
IM-DR420H
ENGLISH
! Track intervals
When recording from the microphone, track numbers will
be created automatically at regular intervals (default set-
ting: approximately every 5 minutes). During a mic syn-
chro recording, the unit pauses when a silence lasts for 3
seconds or more, and creates a track number.
Changing intervals between tracks
1
Press the MENU/ENTER button.
2
Press the or button repeatedly to select
"MARK".
3
Press the MENU/ENTER button.
4
Press the or button.
(A new track number is
created every 3 minutes.)
(A new track number is
created every 5 minutes.)
The interval between marks may vary slightly com-
pared with the actual recording time.
E-29
IM-DR420H TINSZ0964AWZZ
5
Press the MENU/ENTER button.
The mode will be set automatically after 7 seconds even
if the MENU/ENTER button is not pressed.
6
Track numbers will be created automatically at regu-
lar intervals.
Example: Set to "5 minutes".
During a mic manual recording
Timed auto marks will be created every 5 minutes.
Track
number 1
5 minutes
During a mic synchro recording
If a silence lasts for 3 seconds or more, a timed auto mark
will be created 5 minutes after the previous mark is created.
(No automatic track numbers
: Track number which is created by the timed auto mark function.
are created.)
: Track number which is created when a silence lasts for 3 seconds
or more during synchro recording.
Track Track
number 1 number 2
(A new track number is
created every 10 minutes.)
2 minutes
Creating track numbers manually
" Press the REC button whilst recording.
" The BASS button on the remote control can also be used
to add track numbers.
03/7/21
Track Track Track
number 2 number 3 number 4
5 minutes 5 minutes
Track Track Track
number 3 number 4 number 5
5 minutes 1 minute 5 minutes
IM-DR420H_SEEG_E.fm
9