Error Messages - Sharp IM-DR420H Operation Manual

Error Messages

IM-DR420H
ERROR
MESSAGES
BATT EMPTY " The battery has run down.
" Nothing is recorded.
BLANK MD
(Replace the disc with a recorded disc.)
" You tried to record from a copy pro-
Can't COPY
hibited MiniDisc.
(Record using the analogue cable.)
" You tried to record signals other than
music (such as data).
" A track cannot be edited.
Can't EDIT
(Change the stop position of the track
and then edit it.)
" You tried to remove the MD whilst re-
Can't LOCK
cording or editing.
" You tried to play back a track that
Can't PLAY
cannot be played with this equip-
ment.
" The disc data cannot be read be-
Can't READ
(*) cause the disc is damaged.
(Reload the Minidisc or replace it with
another one.)
" Recording cannot be performed cor-
Can't REC
rectly due to vibration or shock.
52
IM-DR420H(E) TINSE0554AWZZ
MEANING ERROR
MESSAGES
Can'tSTAMP
Can'tWRITE
DEFECT!
DISC FULL
Er-MD (**)
HOLD
LOCKED
NO DISC
A number or symbol appears in (*) position.
MEANING
" Stamp function does not work.
(Check the number of tracks.)
" Cannot save the TOC information
correctly to a MiniDisc.
" The disc is scratched.
(If the recorded sound is not right, retry
recording or replace the disc with a re-
cordable one.)
" The disc is out of recording space.
" The microprocessor has reported a
system fault and the unit is out of or-
der.
(To have it repaired, go to the distributor
where you purchased the unit.)
" The unit is in the hold mode.
" You removed a MiniDisc whilst re-
cording or editing.
(Turn off the power before removing the
MiniDisc.)
" A disc has not been loaded.
03/7/21 IM-DR420H_UK_6.fm