Sharp IM-DR420H Operation Manual page 23

5
Press the MENU/ENTER button.
6
Press the or button repeatedly to select "REC
MODE".
7
Press the MENU/ENTER button.
8
Press the or button repeatedly to select the
recording mode (page 21).
(Stereo recording)
SP
(2 times long recording)
(4 times long recording)
(Monaural recording)
9
Press the MENU/ENTER button.
The mode will be set automatically after 7 seconds even
if the MENU/ENTER button is not pressed.
10
Press the button to start the MiniDisc unit re-
cording.
11
Begin playback on the stereo system, the output
will be recorded.
IM-DR420H TINSZ0964AWZZ
Notes:
" Complete the operation within 7 seconds whilst selecting
the menus.
" Changing the volume level whilst recording does not affect
the recording.
" You cannot adjust the bass level whilst recording.
" Whilst "TOC" is displayed, the MiniDisc recorded contents
are not yet updated.
TOC display
To interrupt recording
Press the button.
" To resume recording, press the
button again.
" The track number will be increased by one each time the
recording is interrupted.
To stop recording
Press the :OFF/HOLD button.
When recording is stopped, TOC is written on the MD. The
"TOC" indicator disappears.
03/7/21 IM-DR420H_SEEG_E.fm
IM-DR420H
ENGLISH
E-16