Info" Menu - Epson EMP-760 User Manual

Using the Configuration Menu Functions

"Info" Menu

• The "Info" menu shows the setting details for the current
image source.
• The "Lamp Hours" item appears as 0H for 0–10 hours,
and after that, it appears in units of 1 hour.
Computer/RGB Video/Component videog
Composite videog/ S-Videog
Sub-menu
Lamp Displays the cumulative lamp operating time for both
Hours "High Brightness" and "Low Brightness".
•When the lamp warning period is reached, the display
characters appear in red.
Source Displays the input source which is currently being projected.
Input Displays the input signal settings.
Signal (Does not appear when the input source is Composite Video,
S-Video or EasyMP.)
Resolution Displays the input resolution.
(Does not appear when the input source is Composite Video,
S-Video or EasyMP.)
Video Shows the video signal format.
Signal (Does not appear when the input source is Computer, RGB
video, Component Video or EasyMP.)
Refresh Displays the refresh rate.
Rateg (Does not appear when the input source is Composite Video,
S-Video or EasyMP.)
Sync.g Informations in this menu may be required in case that you
Info ask for service to your dealer or the nearest address provided
at "International Warranty Conditions" section of the Safety
Instructions/World Wide Warranty Terms booklet.
(Does not appear when the input source is Composite Video,
S-Video or EasyMP.)
Function
User's Guide
67
Default
0H
-
-
-
-