Epson EMP-760 User Manual page 67

Using the Configuration Menu Functions
Sub-menu
Standby (EMP-765 only)
Mode Set to "Network ON" to use network monitoring and control
functions and the standby monitor out function while the
projector is in standby mode.
To enable the new settings, turn the projector's power off and
then turn it back on again.
* When set to "Network ON", the Power indicator will flash
orange and then remain orange after disconnecting the
power plug and reinserting it into the electrical outlet.
Link21L Sets whether the EMP Link21Lg
used or not.
After changing the setting, turn the projector's power off and
then turn it back on again to enable EMP Link21L.
Language Sets the language for message displays.
•Press the [Enter] button on the remote control or on the
projector's control panel and then make the selection.
Reset Returns "Display" and "Operation" settings in the
"Extended" menu to their default settings.
However, if "Background Color" has been set to "Logo" or if
"Startup Screen" has been set to "OFF", the settings will not
be returned to their defaults if "User's Logo Protect" is set to
sp.33
"ON".
•Press the [Enter] button on the remote control or on the
projector's control panel.
•To return all settings such as the "Image" and "Signal"
menu settings to their default values, select "Reset All"
from the "Reset" menu.
Function
utility software is being
sp.68
User's Guide
66
Default
Network OFF
OFF
English
(Varies
depending on
country of
purchase)
-