Selecting The Projection Quality (Colour Mode Selection) - Epson EMP-760 User Manual

Adjusting the Image Quality
Selecting the Projection Quality
(Colour Mode Selection)
The following six preset colour modes are available for use depending on
the characteristics of the images that are being projected. You can easily
obtain the optimum image quality simply by selecting the colour mode that
corresponds to the projected images. The brightness of the images will
vary depending on which colour mode is selected.
Mode
Dynamic Brightness is emphasised, so that images are fresher and have
greater modulation than in Presentation mode.
Presentation Brightness is emphasised to produce images that are ideal for
presentations.
Theatre Movie images are optimised using natural tints.
Living Room Brightness is emphasised to produce images that are ideal for
projecting TV images, etc. in bright rooms.
sRGBg Images conform to the sRGB colour standard. If the connected
source has a sRGB mode, set both the projector and the
connected signal source to sRGB.
Blackboard Images with natural tints can be obtained when projecting
onto a blackboard (green).
The default setting for the colour mode is as follows.
When computer or RGB video images are being input: "Presentation"
When other images are being input: "Dynamic"
Application
PROCEDURE
The colour mode changes as follows each time the [Color
Mode] button is pressed.
Dynamic Presentation
Blackboard sRGB
Remote control
The current setting appears in the top-right corner of the screen each
time the colour mode is changed.
TIP
The colour mode can also be set using the "Color Mode" command in
the "Image" menu. sp.56,
p.58
User's Guide
47
Theatre
Living Room