Inserting and Removing Cards (EMP-765 only)
Access Lamp Status
Card Slot Access Lamp Status
When a memory card has been inserted into the projector's card slot,
you can check the access status of the memory card by noting
whether the access lamp is lit and what colour it is, as described
below.
Status
Green
Data is being read from the memory card.
Off
The memory card is in standby state.
Red
An error occurred while data was being read from the memory
card.
Lit
Access status
Wireless LAN Card Access Lamp Status
The card slot access lamp does not light when a wireless LAN card has
been inserted into the projector.
You can check the network communication status by observing the status
of the wireless LAN access lamps as described below.
Off
Lamp
Status
LINK
Green
Green
ACT
Green
Lit
Communication status
The projector is connected to the network and
communication is possible.
Connection to a valid network is in progress.
Data is being transmitted or received.
User's Guide
19
flashing